Specify with confidence.
Technical data tables
Chemical composition reference — weight %
Alleima rows are nominal compositions, with limits where marked. ATI rows are flat-product chemistry limits, not pipe limits. “—” means no value is provided here; it does not mean zero.
| Reference material | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 304 / 304L — Alleima 3R12 | ≤0.030 | 0.5 | 1.3 | ≤0.030 | ≤0.015 | 18.5 | 10 | — | — | — |
| 316 / 316L — Alleima 3R65 | ≤0.030 | 0.4 | 1.7 | ≤0.040 | ≤0.015 | 17 | 11.5 | 2.1 | — | — |
Mechanical property reference
Values apply to the cited mill product and test basis. They are not certificates or universal acceptance values for Tokk Steel material.
| Reference material | Test °C | Rp0.2 / yield (MPa) | Tensile (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|---|
| 304 / 304L — Alleima 3R12 | 20 | ≥210 | 515–680 | ≥45 | ≤90 HRB |
| 316 / 316L — Alleima 3R65 | 20 | ≥220 | 515–690 | ≥45 | ≤90 HRB |
304 / 304L — Alleima 3R12: Nominal mill chemistry and published seamless tube/pipe properties. Elongation A uses L₀ = 5.65√S₀. For wall above 10 mm the source notes proof strength may be about 10 MPa lower. View source datasheet ↗
316 / 316L — Alleima 3R65: Nominal mill chemistry and published seamless tube/pipe properties. Elongation A uses L₀ = 5.65√S₀. The source states proof strength can be about 10 MPa lower for wall above 10 mm. View source datasheet ↗
Pipe dimensions and schedules — reference chart
Selected B36.19 dimensions as published in Alleima’s pipe chart. This is a dimensional reference, not a stock or availability list.
| NPS (in.) | OD (mm) | 10S wall (mm) | 40S wall (mm) | 80S wall (mm) |
|---|---|---|---|---|
| 1/4 | 13.72 | 1.65 | 2.24 | 3.02 |
| 3/8 | 17.15 | 1.65 | 2.31 | 3.20 |
| 1/2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3/4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.40 | 2.77 | 3.38 | 4.55 |
| 1¼ | 42.16 | 2.77 | 3.56 | 4.85 |
| 1½ | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.33 | 2.77 | 3.91 | 5.54 |
| 2½ | 73.03 | 3.05 | 5.16 | 7.01 |
| 3 | 88.90 | 3.05 | 5.49 | 7.62 |
| 3½ | 101.60 | 3.05 | 5.74 | 8.08 |
| 4 | 114.30 | 3.05 | 6.02 | 8.56 |
Calculated pipe weight — 40S examples
Calculated using density 8.00 g/cm³ and nominal dimensions: kg/m = π/4 × (OD² − ID²) × density / 1000. Dimensions are in mm. Actual mass varies with alloy density and tolerances; these are not certified weights.
| NPS (in.) | OD (mm) | Wall (mm) | ID (mm) | Approx. kg/m |
|---|---|---|---|---|
| 1/4 | 13.72 | 2.24 | 9.24 | 0.646 |
| 3/8 | 17.15 | 2.31 | 12.53 | 0.862 |
| 1/2 | 21.34 | 2.77 | 15.80 | 1.293 |
| 3/4 | 26.67 | 2.87 | 20.93 | 1.717 |
| 1 | 33.40 | 3.38 | 26.64 | 2.550 |
| 1¼ | 42.16 | 3.56 | 35.04 | 3.454 |
| 1½ | 48.26 | 3.68 | 40.90 | 4.123 |
| 2 | 60.33 | 3.91 | 52.51 | 5.544 |
| 2½ | 73.03 | 5.16 | 62.71 | 8.802 |
| 3 | 88.90 | 5.49 | 77.92 | 11.509 |
| 3½ | 101.60 | 5.74 | 90.12 | 13.829 |
| 4 | 114.30 | 6.02 | 102.26 | 16.383 |
Tables are sourced reference data or explicitly calculated examples. Your order’s grade, product standard and material documentation determine acceptance. Request current pricing with your quantity and specification; no competitor prices or pressure ratings have been transferred.
Electropolishing is a surface treatment
Electropolishing uses an electrochemical process to remove material from the surface and improve its condition. It is a treatment of the base stainless steel, not a different alloy grade. ASTM B912 addresses passivation using electropolishing.
| Reference item | Technical guidance |
|---|---|
| Base material | Specify stainless steel grade and pipe standard |
| Treatment | Electropolishing of specified surfaces |
| Reference | ASTM B912, where required |
| Acceptance | Finish, cleanliness, inspection and final dimensions |
How to use this information
Specify the base material and which surfaces are treated, plus measurable finish and inspection criteria. Because material is removed, consider final dimensional acceptance as well as appearance.
Reference information explains the material or specification. Confirm actual dimensions, grade compliance, certificates and availability with the quotation. Manufacturer-specific approvals and properties apply to that manufacturer’s product.
Technical references: worldstainless — electropolishing guide · ASTM B912 — electropolishing/passivation specification
Send the details below so our team can review your requirement. Sizes, supply conditions and documentation will be confirmed with your quotation.
| Material | Stainless steel |
| Grade | Specified grade |
| Manufacturing type | Specify seamless or welded where applicable |
| Dimensions | Provide outside diameter, wall thickness and length |
| Standard & tolerance | Provide the applicable project specification |
| Finish | Specify your required surface finish |
| Quantity & documentation | Specify quantity and any certificate or inspection requirements |
Turn the surface finish into acceptance criteria
Start with the base stainless steel grade, dimensions and material standard. Identify whether electropolishing is required on the internal surface, external surface or both. Add any specified roughness, cleanliness, inspection or documentation requirements. If surface condition affects a process or assembly, provide the applicable acceptance specification.
Comparing supplier quotations
A polished appearance alone does not verify the required finish. State the measurable acceptance criteria and how they should be demonstrated before ordering.
Example enquiry checklist
Stainless steel pipe; grade; dimensions; surfaces to be electropolished; required finish criteria; inspection; length; quantity.
Stainless Steel Electropolished Pipe supplier enquiries in Mumbai, India
Tokk Steel is the stainless steel pipes and tubes division of Shatrunjay Special Alloy in Mumbai, India. Send your stainless steel electropolished pipe specification to our team with the grade, dimensions and quantity required by your project.
For a local enquiry in Mumbai, include your preferred collection or delivery arrangements for review. For a project elsewhere in India, include the destination and required date so availability, logistics and the quotation scope can be confirmed. Your location does not replace the technical specification: attach the drawing or material requirement when one is available.
Request a product quotation ↗Specification details for this product
| Detail | Information to provide |
|---|---|
| Base material grade and dimensions | Specify with the enquiry |
| Internal or external treated surfaces | Specify with the enquiry |
| Surface acceptance criteria and inspection | Specify with the enquiry |
Typical application areas
- Project-specific equipment
- Industrial assemblies
- Requirements defined by your design
Final material suitability should be assessed against your project’s operating conditions and applicable standards.
Buying stainless steel electropolished pipe
Specify which surfaces require electropolishing and provide measurable acceptance criteria for the finish.
Define the surface acceptance criteria
A named finish does not by itself define the required surface condition. Specify measurable acceptance criteria and any inspection requirements.
Questions about Stainless Steel Electropolished Pipe
What should I specify for stainless steel electropolished pipe?
Specify which surfaces require electropolishing and provide measurable acceptance criteria for the finish.
Are all listed sizes and grades held in stock?
Availability, dimensions, lead time and documentation are confirmed with your quotation. Send your exact requirement rather than assuming availability from a product category.
Quotation questions
What should I include in my enquiry?
Include grade, dimensions, quantity, required standard, finish and delivery destination. Attach your specification when sending the email draft.
Can you confirm sizes and availability?
Our team will review your dimensions and confirm availability and lead time as part of the quotation.
