Specify with confidence.
Technical data tables
Chemical composition reference — weight %
Alleima rows are nominal compositions, with limits where marked. ATI rows are flat-product chemistry limits, not pipe limits. “—” means no value is provided here; it does not mean zero.
| Reference material | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 304 / 304L — Alleima 3R12 | ≤0.030 | 0.5 | 1.3 | ≤0.030 | ≤0.015 | 18.5 | 10 | — | — | — |
| 316 / 316L — Alleima 3R65 | ≤0.030 | 0.4 | 1.7 | ≤0.040 | ≤0.015 | 17 | 11.5 | 2.1 | — | — |
Mechanical property reference
Values apply to the cited mill product and test basis. They are not certificates or universal acceptance values for Tokk Steel material.
| Reference material | Test °C | Rp0.2 / yield (MPa) | Tensile (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|---|
| 304 / 304L — Alleima 3R12 | 20 | ≥210 | 515–680 | ≥45 | ≤90 HRB |
| 316 / 316L — Alleima 3R65 | 20 | ≥220 | 515–690 | ≥45 | ≤90 HRB |
304 / 304L — Alleima 3R12: Nominal mill chemistry and published seamless tube/pipe properties. Elongation A uses L₀ = 5.65√S₀. For wall above 10 mm the source notes proof strength may be about 10 MPa lower. View source datasheet ↗
316 / 316L — Alleima 3R65: Nominal mill chemistry and published seamless tube/pipe properties. Elongation A uses L₀ = 5.65√S₀. The source states proof strength can be about 10 MPa lower for wall above 10 mm. View source datasheet ↗
Pipe dimensions and schedules — reference chart
Selected B36.19 dimensions as published in Alleima’s pipe chart. This is a dimensional reference, not a stock or availability list.
| NPS (in.) | OD (mm) | 10S wall (mm) | 40S wall (mm) | 80S wall (mm) |
|---|---|---|---|---|
| 1/4 | 13.72 | 1.65 | 2.24 | 3.02 |
| 3/8 | 17.15 | 1.65 | 2.31 | 3.20 |
| 1/2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3/4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.40 | 2.77 | 3.38 | 4.55 |
| 1¼ | 42.16 | 2.77 | 3.56 | 4.85 |
| 1½ | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.33 | 2.77 | 3.91 | 5.54 |
| 2½ | 73.03 | 3.05 | 5.16 | 7.01 |
| 3 | 88.90 | 3.05 | 5.49 | 7.62 |
| 3½ | 101.60 | 3.05 | 5.74 | 8.08 |
| 4 | 114.30 | 3.05 | 6.02 | 8.56 |
Calculated pipe weight — 40S examples
Calculated using density 8.00 g/cm³ and nominal dimensions: kg/m = π/4 × (OD² − ID²) × density / 1000. Dimensions are in mm. Actual mass varies with alloy density and tolerances; these are not certified weights.
| NPS (in.) | OD (mm) | Wall (mm) | ID (mm) | Approx. kg/m |
|---|---|---|---|---|
| 1/4 | 13.72 | 2.24 | 9.24 | 0.646 |
| 3/8 | 17.15 | 2.31 | 12.53 | 0.862 |
| 1/2 | 21.34 | 2.77 | 15.80 | 1.293 |
| 3/4 | 26.67 | 2.87 | 20.93 | 1.717 |
| 1 | 33.40 | 3.38 | 26.64 | 2.550 |
| 1¼ | 42.16 | 3.56 | 35.04 | 3.454 |
| 1½ | 48.26 | 3.68 | 40.90 | 4.123 |
| 2 | 60.33 | 3.91 | 52.51 | 5.544 |
| 2½ | 73.03 | 5.16 | 62.71 | 8.802 |
| 3 | 88.90 | 5.49 | 77.92 | 11.509 |
| 3½ | 101.60 | 5.74 | 90.12 | 13.829 |
| 4 | 114.30 | 6.02 | 102.26 | 16.383 |
Tables are sourced reference data or explicitly calculated examples. Your order’s grade, product standard and material documentation determine acceptance. Request current pricing with your quantity and specification; no competitor prices or pressure ratings have been transferred.
Welded pipe, general tubing and heat-exchanger tubes
Welded stainless products serve different specification families. A312 is a pipe reference, A269 is a general tubing reference, and A249 addresses welded austenitic tubes for boiler, superheater, heat-exchanger and condenser applications. Choose the family appropriate to the actual equipment.
| Reference item | Technical guidance |
|---|---|
| Pipe reference | ASTM A312 |
| General-service tubing reference | ASTM A269 |
| Welded heat-exchanger tubing reference | ASTM A249 |
| Mechanical tubing reference | ASTM A554 |
How to use this information
A welded tube intended for a fabricated mechanical assembly may have different requirements from a process pipe or heat-exchanger tube. Record the product form and governing standard before comparing dimensions or inspection scope.
Reference information explains the material or specification. Confirm actual dimensions, grade compliance, certificates and availability with the quotation. Manufacturer-specific approvals and properties apply to that manufacturer’s product.
Technical references: ASTM A312/A312M-25 — pipe specification · ASTM A269/A269M-25 — general-service tubing · ASTM A249/A249M — welded heat-exchanger tubing · ASTM A554 — welded mechanical tubing
Send the details below so our team can review your requirement. Sizes, supply conditions and documentation will be confirmed with your quotation.
| Material | Stainless steel |
| Grade | Specified grade |
| Manufacturing type | Welded |
| Dimensions | Provide outside diameter, wall thickness and length |
| Standard & tolerance | Provide the applicable project specification |
| Finish | Specify your required surface finish |
| Quantity & documentation | Specify quantity and any certificate or inspection requirements |
Describe the weld and finished surface
Include the weld condition your fabrication or process specification requires. An enquiry for an external decorative finish is different from one requiring an internal surface condition. Where weld inspection, heat treatment or a particular welding process matters, list it alongside the tube dimensions. Specify whether lengths are supplied for fabrication or cut for a finished assembly.
Comparing supplier quotations
When reviewing a quotation, check whether the specified weld condition and finish apply to the internal surface, external surface or both. Use the project specification to define acceptance.
Example enquiry checklist
Welded stainless steel pipe or tube; grade; OD and wall or pipe size and schedule; weld condition; finish; length; inspection requirements; quantity.
SS Welded Pipes & Tubes supplier enquiries in Mumbai, India
Tokk Steel is the stainless steel pipes and tubes division of Shatrunjay Special Alloy in Mumbai, India. Send your ss welded pipes & tubes specification to our team with the grade, dimensions and quantity required by your project.
For a local enquiry in Mumbai, include your preferred collection or delivery arrangements for review. For a project elsewhere in India, include the destination and required date so availability, logistics and the quotation scope can be confirmed. Your location does not replace the technical specification: attach the drawing or material requirement when one is available.
Request a product quotation ↗Specification details for this product
| Detail | Information to provide |
|---|---|
| Grade and material standard | Specify with the enquiry |
| Pipe size/schedule or tube OD/wall | Specify with the enquiry |
| Testing and weld requirements where applicable | Specify with the enquiry |
Typical application areas
- Project-specific equipment
- Industrial assemblies
- Requirements defined by your design
Final material suitability should be assessed against your project’s operating conditions and applicable standards.
Specifying stainless steel welded pipes and tubes
A welded pipe or tube is formed from material whose edges are joined by welding. Buyers should specify the manufacturing and inspection requirements that their project calls for, alongside grade and dimensions. “Welded” describes construction; it does not by itself establish a pressure rating, surface finish or compliance with a particular standard.
Make the weld requirements clear
State any requirements for weld condition, heat treatment, inspection and testing in the enquiry. If your specification calls for a particular welding process, include it explicitly. Do not use ERW as a universal synonym for every welded stainless steel product.
Questions about SS Welded Pipes & Tubes
Does welded always mean ERW?
No. A welded product can be made using different welding processes. Where the process matters, state the specific requirement instead of assuming it from the word welded.
What details help with a welded tube quotation?
Provide grade, outside diameter, wall thickness, length, quantity, dimensional tolerances, finish and any weld or inspection requirements. Include the material standard and delivery destination.
Quotation questions
What should I include in my enquiry?
Include grade, dimensions, quantity, required standard, finish and delivery destination. Attach your specification when sending the email draft.
Can you confirm sizes and availability?
Our team will review your dimensions and confirm availability and lead time as part of the quotation.
