Specify with confidence.
Technical data tables
Chemical composition reference — weight %
Alleima rows are nominal compositions, with limits where marked. ATI rows are flat-product chemistry limits, not pipe limits. “—” means no value is provided here; it does not mean zero.
| Reference material | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 904L — Alleima 2RK65 | ≤0.020 | 0.5 | 1.8 | ≤0.025 | ≤0.015 | 20 | 25 | 4.5 | 1.5 | — |
Mechanical property reference
Values apply to the cited mill product and test basis. They are not certificates or universal acceptance values for Tokk Steel material.
| Reference material | Test °C | Rp0.2 / yield (MPa) | Tensile (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|---|
| 904L — Alleima 2RK65 | 20 | ≥230 | 520–720 | ≥35 | ≈160 HV |
904L — Alleima 2RK65: Nominal mill chemistry; mechanical figures apply to its solution-annealed product. Elongation A uses L₀ = 5.65√S₀; hardness is approximate. Source values may be lower above 20 mm thickness. View source datasheet ↗
Pipe dimensions and schedules — reference chart
Selected B36.19 dimensions as published in Alleima’s pipe chart. This is a dimensional reference, not a stock or availability list.
| NPS (in.) | OD (mm) | 10S wall (mm) | 40S wall (mm) | 80S wall (mm) |
|---|---|---|---|---|
| 1/4 | 13.72 | 1.65 | 2.24 | 3.02 |
| 3/8 | 17.15 | 1.65 | 2.31 | 3.20 |
| 1/2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3/4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.40 | 2.77 | 3.38 | 4.55 |
| 1¼ | 42.16 | 2.77 | 3.56 | 4.85 |
| 1½ | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.33 | 2.77 | 3.91 | 5.54 |
| 2½ | 73.03 | 3.05 | 5.16 | 7.01 |
| 3 | 88.90 | 3.05 | 5.49 | 7.62 |
| 3½ | 101.60 | 3.05 | 5.74 | 8.08 |
| 4 | 114.30 | 3.05 | 6.02 | 8.56 |
Calculated pipe weight — 40S examples
Calculated using density 8.00 g/cm³ and nominal dimensions: kg/m = π/4 × (OD² − ID²) × density / 1000. Dimensions are in mm. Actual mass varies with alloy density and tolerances; these are not certified weights.
| NPS (in.) | OD (mm) | Wall (mm) | ID (mm) | Approx. kg/m |
|---|---|---|---|---|
| 1/4 | 13.72 | 2.24 | 9.24 | 0.646 |
| 3/8 | 17.15 | 2.31 | 12.53 | 0.862 |
| 1/2 | 21.34 | 2.77 | 15.80 | 1.293 |
| 3/4 | 26.67 | 2.87 | 20.93 | 1.717 |
| 1 | 33.40 | 3.38 | 26.64 | 2.550 |
| 1¼ | 42.16 | 3.56 | 35.04 | 3.454 |
| 1½ | 48.26 | 3.68 | 40.90 | 4.123 |
| 2 | 60.33 | 3.91 | 52.51 | 5.544 |
| 2½ | 73.03 | 5.16 | 62.71 | 8.802 |
| 3 | 88.90 | 5.49 | 77.92 | 11.509 |
| 3½ | 101.60 | 5.74 | 90.12 | 13.829 |
| 4 | 114.30 | 6.02 | 102.26 | 16.383 |
Tables are sourced reference data or explicitly calculated examples. Your order’s grade, product standard and material documentation determine acceptance. Request current pricing with your quantity and specification; no competitor prices or pressure ratings have been transferred.
904L: material identity and selection
904L uses UNS N08904; the cited reference also lists EN 1.4539. It is a high-alloy austenitic material considered for demanding process environments. The exact application still requires assessment of the chemical exposure.
| Reference item | Technical guidance |
|---|---|
| Grade designation | 904L |
| UNS identifier | N08904 |
| Material family | High-alloy austenitic stainless steel |
| Pipe specification to review | ASTM A312, where required by the project |
| Tube specification to review | ASTM A269 or the application-specific tube standard |
How to use this information
State the actual product standard and grade designation. Published mill approvals, stock dimensions and nominal chemical values belong to that mill product and are not Tokk Steel supply claims.
Reference information explains the material or specification. Confirm actual dimensions, grade compliance, certificates and availability with the quotation. Manufacturer-specific approvals and properties apply to that manufacturer’s product.
Technical references: Alleima 2RK65 — 904L grade reference · ASTM A312/A312M-25 — pipe specification · ASTM A269/A269M-25 — general-service tubing
Send the details below so our team can review your requirement. Sizes, supply conditions and documentation will be confirmed with your quotation.
| Material | Stainless steel |
| Grade | 904L |
| Manufacturing type | Specify seamless or welded where applicable |
| Dimensions | Provide outside diameter, wall thickness and length |
| Standard & tolerance | Provide the applicable project specification |
| Finish | Specify your required surface finish |
| Quantity & documentation | Specify quantity and any certificate or inspection requirements |
Specify the 904L requirement as a complete package
For a 904L enquiry, define the governing material specification and product form first. Record approved dimensions, construction and finish, then add any testing or traceability requirements. Where chemical exposure affects material selection, the project’s engineering review should establish the grade and acceptance criteria before purchasing.
Comparing supplier quotations
Compare alternatives against the complete specification. A quotation with the same grade name can still differ in dimensions, supplied condition or documentation.
Example enquiry checklist
SS 904L pipe or tube; material standard; construction; OD and wall or pipe designation; length; finish; quantity; documentation.
SS 904L Pipes & Tubes supplier enquiries in Mumbai, India
Tokk Steel is the stainless steel pipes and tubes division of Shatrunjay Special Alloy in Mumbai, India. Send your ss 904l pipes & tubes specification to our team with the grade, dimensions and quantity required by your project.
For a local enquiry in Mumbai, include your preferred collection or delivery arrangements for review. For a project elsewhere in India, include the destination and required date so availability, logistics and the quotation scope can be confirmed. Your location does not replace the technical specification: attach the drawing or material requirement when one is available.
Request a product quotation ↗Specification details for this product
| Detail | Information to provide |
|---|---|
| Exact grade and governing standard | Specify with the enquiry |
| Pipe or tube dimensional designation | Specify with the enquiry |
| Construction type and documentation | Specify with the enquiry |
Typical application areas
- Project-specific equipment
- Industrial assemblies
- Requirements defined by your design
Final material suitability should be assessed against your project’s operating conditions and applicable standards.
Buying ss 904l pipes & tubes
Define the exact 904L material specification and operating conditions; a grade label alone does not establish suitability.
Define the purchase specification
Match the exact grade on the enquiry, quotation and material documentation. Any proposed substitution should be reviewed against the project requirements.
Grade guidance: Outokumpu stainless steel types. Check the applicable material specification for acceptance criteria.
Questions about SS 904L Pipes & Tubes
What should I specify for ss 904l pipes & tubes?
Define the exact 904L material specification and operating conditions; a grade label alone does not establish suitability.
Are all listed sizes and grades held in stock?
Availability, dimensions, lead time and documentation are confirmed with your quotation. Send your exact requirement rather than assuming availability from a product category.
Quotation questions
What should I include in my enquiry?
Include grade, dimensions, quantity, required standard, finish and delivery destination. Attach your specification when sending the email draft.
Can you confirm sizes and availability?
Our team will review your dimensions and confirm availability and lead time as part of the quotation.
