Specify with confidence.
Technical data tables
Chemical composition reference — weight %
Alleima rows are nominal compositions, with limits where marked. ATI rows are flat-product chemistry limits, not pipe limits. “—” means no value is provided here; it does not mean zero.
| Reference material | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 310 — ATI flat-product reference | ≤0.25 | ≤1.50 | ≤2.00 | ≤0.045 | ≤0.030 | 24–26 | 19–22 | — | — | — |
Mechanical property reference
Values apply to the cited mill product and test basis. They are not certificates or universal acceptance values for Tokk Steel material.
| Reference material | Test °C | Rp0.2 / yield (MPa) | Tensile (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|---|
| 310 — ATI flat-product reference | 25 | 292 typical | 617 typical | 45 typical | Not listed |
310 — ATI flat-product reference: ATI chemistry limits reference ASTM A167/A240 flat products. Mechanical figures are typical sample averages at 25°C with 50.8 mm elongation gauge length. These are not A312 pipe acceptance limits. View source datasheet ↗
Pipe dimensions and schedules — reference chart
Selected B36.19 dimensions as published in Alleima’s pipe chart. This is a dimensional reference, not a stock or availability list.
| NPS (in.) | OD (mm) | 10S wall (mm) | 40S wall (mm) | 80S wall (mm) |
|---|---|---|---|---|
| 1/4 | 13.72 | 1.65 | 2.24 | 3.02 |
| 3/8 | 17.15 | 1.65 | 2.31 | 3.20 |
| 1/2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3/4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.40 | 2.77 | 3.38 | 4.55 |
| 1¼ | 42.16 | 2.77 | 3.56 | 4.85 |
| 1½ | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.33 | 2.77 | 3.91 | 5.54 |
| 2½ | 73.03 | 3.05 | 5.16 | 7.01 |
| 3 | 88.90 | 3.05 | 5.49 | 7.62 |
| 3½ | 101.60 | 3.05 | 5.74 | 8.08 |
| 4 | 114.30 | 3.05 | 6.02 | 8.56 |
Calculated pipe weight — 40S examples
Calculated using density 8.00 g/cm³ and nominal dimensions: kg/m = π/4 × (OD² − ID²) × density / 1000. Dimensions are in mm. Actual mass varies with alloy density and tolerances; these are not certified weights.
| NPS (in.) | OD (mm) | Wall (mm) | ID (mm) | Approx. kg/m |
|---|---|---|---|---|
| 1/4 | 13.72 | 2.24 | 9.24 | 0.646 |
| 3/8 | 17.15 | 2.31 | 12.53 | 0.862 |
| 1/2 | 21.34 | 2.77 | 15.80 | 1.293 |
| 3/4 | 26.67 | 2.87 | 20.93 | 1.717 |
| 1 | 33.40 | 3.38 | 26.64 | 2.550 |
| 1¼ | 42.16 | 3.56 | 35.04 | 3.454 |
| 1½ | 48.26 | 3.68 | 40.90 | 4.123 |
| 2 | 60.33 | 3.91 | 52.51 | 5.544 |
| 2½ | 73.03 | 5.16 | 62.71 | 8.802 |
| 3 | 88.90 | 5.49 | 77.92 | 11.509 |
| 3½ | 101.60 | 5.74 | 90.12 | 13.829 |
| 4 | 114.30 | 6.02 | 102.26 | 16.383 |
Tables are sourced reference data or explicitly calculated examples. Your order’s grade, product standard and material documentation determine acceptance. Request current pricing with your quantity and specification; no competitor prices or pressure ratings have been transferred.
TP310 / 310: material identity and selection
310 is identified as UNS S31000. It is a distinct designation from 310S, which uses UNS S31008. Published alloy guidance discusses 310 for elevated-temperature service, but a grade summary does not establish a design temperature.
| Reference item | Technical guidance |
|---|---|
| Grade designation | TP310 / 310 |
| UNS identifier | S31000 |
| Material family | High-alloy austenitic chromium-nickel stainless steel |
| Pipe specification to review | ASTM A312, where required by the project |
| Tube specification to review | ASTM A269 or the application-specific tube standard |
How to use this information
ATI’s cited reference describes its flat-product alloys. Here it supports grade identity and general alloy context; its flat-product chemistry limits and product availability are not presented as Tokk Steel pipe specifications.
Reference information explains the material or specification. Confirm actual dimensions, grade compliance, certificates and availability with the quotation. Manufacturer-specific approvals and properties apply to that manufacturer’s product.
Technical references: ATI — 309, 309S, 310 and 310S grade reference · ASTM A312/A312M-25 — pipe specification · ASTM A269/A269M-25 — general-service tubing
Send the details below so our team can review your requirement. Sizes, supply conditions and documentation will be confirmed with your quotation.
| Material | Stainless steel |
| Grade | TP310 |
| Manufacturing type | Specify seamless or welded where applicable |
| Dimensions | Provide outside diameter, wall thickness and length |
| Standard & tolerance | Provide the applicable project specification |
| Finish | Specify your required surface finish |
| Quantity & documentation | Specify quantity and any certificate or inspection requirements |
Separate TP310 grade from service requirements
For an ASTM A312 TP310 enquiry, record the full grade designation and required standard edition. Add the operating conditions for your engineer’s material review, then state pipe dimensions and construction. Where the piping will be fabricated, include relevant end preparation, joining or inspection requirements so the request covers the supplied condition.
Comparing supplier quotations
TP310, TP310S and any other proposed designation should be compared against the actual project specification. Do not shorten the grade name when issuing a purchase enquiry.
Example enquiry checklist
ASTM A312, required edition; TP310; construction; pipe size and schedule; length; end condition; quantity; documentation.
ASTM A312 TP310 Pipes supplier enquiries in Mumbai, India
Tokk Steel is the stainless steel pipes and tubes division of Shatrunjay Special Alloy in Mumbai, India. Send your astm a312 tp310 pipes specification to our team with the grade, dimensions and quantity required by your project.
For a local enquiry in Mumbai, include your preferred collection or delivery arrangements for review. For a project elsewhere in India, include the destination and required date so availability, logistics and the quotation scope can be confirmed. Your location does not replace the technical specification: attach the drawing or material requirement when one is available.
Request a product quotation ↗Specification details for this product
| Detail | Information to provide |
|---|---|
| Exact grade and governing standard | Specify with the enquiry |
| Pipe or tube dimensional designation | Specify with the enquiry |
| Construction type and documentation | Specify with the enquiry |
Typical application areas
- Project-specific equipment
- Industrial assemblies
- Requirements defined by your design
Final material suitability should be assessed against your project’s operating conditions and applicable standards.
Buying astm a312 tp310 pipes
Keep TP310 separate from TP310S in the enquiry. Confirm the exact grade designation and the applicable edition of your project specification.
Define the purchase specification
Match the exact grade on the enquiry, quotation and material documentation. Any proposed substitution should be reviewed against the project requirements.
Grade guidance: Outokumpu stainless steel types. Check the applicable material specification for acceptance criteria.
Questions about ASTM A312 TP310 Pipes
What should I specify for astm a312 tp310 pipes?
Keep TP310 separate from TP310S in the enquiry. Confirm the exact grade designation and the applicable edition of your project specification.
Are all listed sizes and grades held in stock?
Availability, dimensions, lead time and documentation are confirmed with your quotation. Send your exact requirement rather than assuming availability from a product category.
Quotation questions
What should I include in my enquiry?
Include grade, dimensions, quantity, required standard, finish and delivery destination. Attach your specification when sending the email draft.
Can you confirm sizes and availability?
Our team will review your dimensions and confirm availability and lead time as part of the quotation.
