Specify with confidence.
Technical data tables
Chemical composition reference — weight %
Alleima rows are nominal compositions, with limits where marked. ATI rows are flat-product chemistry limits, not pipe limits. “—” means no value is provided here; it does not mean zero.
| Reference material | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 316 / 316L — Alleima 3R65 | ≤0.030 | 0.4 | 1.7 | ≤0.040 | ≤0.015 | 17 | 11.5 | 2.1 | — | — |
Mechanical property reference
Values apply to the cited mill product and test basis. They are not certificates or universal acceptance values for Tokk Steel material.
| Reference material | Test °C | Rp0.2 / yield (MPa) | Tensile (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|---|
| 316 / 316L — Alleima 3R65 | 20 | ≥220 | 515–690 | ≥45 | ≤90 HRB |
316 / 316L — Alleima 3R65: Nominal mill chemistry and published seamless tube/pipe properties. Elongation A uses L₀ = 5.65√S₀. The source states proof strength can be about 10 MPa lower for wall above 10 mm. View source datasheet ↗
Pipe dimensions and schedules — reference chart
Selected B36.19 dimensions as published in Alleima’s pipe chart. This is a dimensional reference, not a stock or availability list.
| NPS (in.) | OD (mm) | 10S wall (mm) | 40S wall (mm) | 80S wall (mm) |
|---|---|---|---|---|
| 1/4 | 13.72 | 1.65 | 2.24 | 3.02 |
| 3/8 | 17.15 | 1.65 | 2.31 | 3.20 |
| 1/2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3/4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.40 | 2.77 | 3.38 | 4.55 |
| 1¼ | 42.16 | 2.77 | 3.56 | 4.85 |
| 1½ | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.33 | 2.77 | 3.91 | 5.54 |
| 2½ | 73.03 | 3.05 | 5.16 | 7.01 |
| 3 | 88.90 | 3.05 | 5.49 | 7.62 |
| 3½ | 101.60 | 3.05 | 5.74 | 8.08 |
| 4 | 114.30 | 3.05 | 6.02 | 8.56 |
Calculated pipe weight — 40S examples
Calculated using density 8.00 g/cm³ and nominal dimensions: kg/m = π/4 × (OD² − ID²) × density / 1000. Dimensions are in mm. Actual mass varies with alloy density and tolerances; these are not certified weights.
| NPS (in.) | OD (mm) | Wall (mm) | ID (mm) | Approx. kg/m |
|---|---|---|---|---|
| 1/4 | 13.72 | 2.24 | 9.24 | 0.646 |
| 3/8 | 17.15 | 2.31 | 12.53 | 0.862 |
| 1/2 | 21.34 | 2.77 | 15.80 | 1.293 |
| 3/4 | 26.67 | 2.87 | 20.93 | 1.717 |
| 1 | 33.40 | 3.38 | 26.64 | 2.550 |
| 1¼ | 42.16 | 3.56 | 35.04 | 3.454 |
| 1½ | 48.26 | 3.68 | 40.90 | 4.123 |
| 2 | 60.33 | 3.91 | 52.51 | 5.544 |
| 2½ | 73.03 | 5.16 | 62.71 | 8.802 |
| 3 | 88.90 | 5.49 | 77.92 | 11.509 |
| 3½ | 101.60 | 5.74 | 90.12 | 13.829 |
| 4 | 114.30 | 6.02 | 102.26 | 16.383 |
Tables are sourced reference data or explicitly calculated examples. Your order’s grade, product standard and material documentation determine acceptance. Request current pricing with your quantity and specification; no competitor prices or pressure ratings have been transferred.
316L: material identity and selection
316L is identified as UNS S31603. It combines the molybdenum-bearing 316 family with a lower-carbon grade designation. The grade does not prescribe a universal pressure rating or surface finish.
| Reference item | Technical guidance |
|---|---|
| Grade designation | 316L |
| UNS identifier | S31603 |
| Material family | Low-carbon, molybdenum-bearing austenitic stainless steel |
| Pipe specification to review | ASTM A312, where required by the project |
| Tube specification to review | ASTM A269 or the application-specific tube standard |
How to use this information
Where tubing connects to fittings, check OD, wall thickness, hardness and surface requirements against the fitting manufacturer’s instructions as well as the material specification.
Reference information explains the material or specification. Confirm actual dimensions, grade compliance, certificates and availability with the quotation. Manufacturer-specific approvals and properties apply to that manufacturer’s product.
Technical references: Alleima 3R65 — 316/316L grade reference · ASTM A312/A312M-25 — pipe specification · ASTM A269/A269M-25 — general-service tubing
Send the details below so our team can review your requirement. Sizes, supply conditions and documentation will be confirmed with your quotation.
| Material | Stainless steel |
| Grade | 316L |
| Manufacturing type | Specify seamless or welded where applicable |
| Dimensions | Provide outside diameter, wall thickness and length |
| Standard & tolerance | Provide the applicable project specification |
| Finish | Specify your required surface finish |
| Quantity & documentation | Specify quantity and any certificate or inspection requirements |
Connect 316L grade, fabrication and documentation
A 316L purchase enquiry should state the grade in full and identify any fabrication or documentation requirements attached to it. Include pipe or tube form, construction and the dimensions your assembly uses. If your design specifies internal surface condition or particular inspection, record those requirements before quotations are compared.
Comparing supplier quotations
If dual-certified material is requested, ask for explicit confirmation of the certification scope. Keep the material approval tied to the required standard and service conditions.
Example enquiry checklist
SS 316L tube; OD × wall; construction; length; internal/external finish; quantity; applicable specification and documentation.
SS 316L Pipes & Tubes supplier enquiries in Mumbai, India
Tokk Steel is the stainless steel pipes and tubes division of Shatrunjay Special Alloy in Mumbai, India. Send your ss 316l pipes & tubes specification to our team with the grade, dimensions and quantity required by your project.
For a local enquiry in Mumbai, include your preferred collection or delivery arrangements for review. For a project elsewhere in India, include the destination and required date so availability, logistics and the quotation scope can be confirmed. Your location does not replace the technical specification: attach the drawing or material requirement when one is available.
Request a product quotation ↗Specification details for this product
| Detail | Information to provide |
|---|---|
| Exact grade and governing standard | Specify with the enquiry |
| Pipe or tube dimensional designation | Specify with the enquiry |
| Construction type and documentation | Specify with the enquiry |
Typical application areas
- Project-specific equipment
- Industrial assemblies
- Requirements defined by your design
Final material suitability should be assessed against your project’s operating conditions and applicable standards.
Buying ss 316l pipes & tubes
State 316L when the lower-carbon grade is required. Confirm any dual-certification requirement separately.
Define the purchase specification
Match the exact grade on the enquiry, quotation and material documentation. Any proposed substitution should be reviewed against the project requirements.
Grade guidance: Outokumpu stainless steel types. Check the applicable material specification for acceptance criteria.
Questions about SS 316L Pipes & Tubes
What should I specify for ss 316l pipes & tubes?
State 316L when the lower-carbon grade is required. Confirm any dual-certification requirement separately.
Are all listed sizes and grades held in stock?
Availability, dimensions, lead time and documentation are confirmed with your quotation. Send your exact requirement rather than assuming availability from a product category.
Quotation questions
What should I include in my enquiry?
Include grade, dimensions, quantity, required standard, finish and delivery destination. Attach your specification when sending the email draft.
Can you confirm sizes and availability?
Our team will review your dimensions and confirm availability and lead time as part of the quotation.
