Specify with confidence.
Technical data tables
Chemical composition reference — weight %
Alleima rows are nominal compositions, with limits where marked. ATI rows are flat-product chemistry limits, not pipe limits. “—” means no value is provided here; it does not mean zero.
| Reference material | C | Si | Mn | P | S | Cr | Ni | Mo | Cu | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| 321 — Alleima 6R35 | 0.05 | 0.5 | 1.3 | ≤0.030 | ≤0.015 | 17.5 | 10.5 | — | — | ≥5 × C |
Mechanical property reference
Values apply to the cited mill product and test basis. They are not certificates or universal acceptance values for Tokk Steel material.
| Reference material | Test °C | Rp0.2 / yield (MPa) | Tensile (MPa) | Elongation (%) | Hardness |
|---|---|---|---|---|---|
| 321 — Alleima 6R35 | 20 | ≥210 | 515–690 | ≥35 | ≤90 HRB |
321 — Alleima 6R35: Nominal mill chemistry and published seamless tube/pipe properties. Elongation A uses L₀ = 5.65√S₀. Titanium is shown relative to carbon as in the cited datasheet. View source datasheet ↗
Pipe dimensions and schedules — reference chart
Selected B36.19 dimensions as published in Alleima’s pipe chart. This is a dimensional reference, not a stock or availability list.
| NPS (in.) | OD (mm) | 10S wall (mm) | 40S wall (mm) | 80S wall (mm) |
|---|---|---|---|---|
| 1/4 | 13.72 | 1.65 | 2.24 | 3.02 |
| 3/8 | 17.15 | 1.65 | 2.31 | 3.20 |
| 1/2 | 21.34 | 2.11 | 2.77 | 3.73 |
| 3/4 | 26.67 | 2.11 | 2.87 | 3.91 |
| 1 | 33.40 | 2.77 | 3.38 | 4.55 |
| 1¼ | 42.16 | 2.77 | 3.56 | 4.85 |
| 1½ | 48.26 | 2.77 | 3.68 | 5.08 |
| 2 | 60.33 | 2.77 | 3.91 | 5.54 |
| 2½ | 73.03 | 3.05 | 5.16 | 7.01 |
| 3 | 88.90 | 3.05 | 5.49 | 7.62 |
| 3½ | 101.60 | 3.05 | 5.74 | 8.08 |
| 4 | 114.30 | 3.05 | 6.02 | 8.56 |
Calculated pipe weight — 40S examples
Calculated using density 8.00 g/cm³ and nominal dimensions: kg/m = π/4 × (OD² − ID²) × density / 1000. Dimensions are in mm. Actual mass varies with alloy density and tolerances; these are not certified weights.
| NPS (in.) | OD (mm) | Wall (mm) | ID (mm) | Approx. kg/m |
|---|---|---|---|---|
| 1/4 | 13.72 | 2.24 | 9.24 | 0.646 |
| 3/8 | 17.15 | 2.31 | 12.53 | 0.862 |
| 1/2 | 21.34 | 2.77 | 15.80 | 1.293 |
| 3/4 | 26.67 | 2.87 | 20.93 | 1.717 |
| 1 | 33.40 | 3.38 | 26.64 | 2.550 |
| 1¼ | 42.16 | 3.56 | 35.04 | 3.454 |
| 1½ | 48.26 | 3.68 | 40.90 | 4.123 |
| 2 | 60.33 | 3.91 | 52.51 | 5.544 |
| 2½ | 73.03 | 5.16 | 62.71 | 8.802 |
| 3 | 88.90 | 5.49 | 77.92 | 11.509 |
| 3½ | 101.60 | 5.74 | 90.12 | 13.829 |
| 4 | 114.30 | 6.02 | 102.26 | 16.383 |
Tables are sourced reference data or explicitly calculated examples. Your order’s grade, product standard and material documentation determine acceptance. Request current pricing with your quantity and specification; no competitor prices or pressure ratings have been transferred.
TP321 / 321: material identity and selection
321 is identified as UNS S32100. Titanium stabilisation distinguishes it from unstabilised chromium-nickel grades. 321H is a separate designation with UNS S32109 and should be handled explicitly when required.
| Reference item | Technical guidance |
|---|---|
| Grade designation | TP321 / 321 |
| UNS identifier | S32100 |
| Material family | Titanium-stabilised austenitic stainless steel |
| Pipe specification to review | ASTM A312, where required by the project |
| Tube specification to review | ASTM A269 or the application-specific tube standard |
How to use this information
Stabilisation does not make the material immune to all corrosion mechanisms. Review the environment, fabrication and operating conditions before approving its use.
Reference information explains the material or specification. Confirm actual dimensions, grade compliance, certificates and availability with the quotation. Manufacturer-specific approvals and properties apply to that manufacturer’s product.
Technical references: Alleima 6R35 — 321 grade reference · ASTM A312/A312M-25 — pipe specification · ASTM A269/A269M-25 — general-service tubing
Send the details below so our team can review your requirement. Sizes, supply conditions and documentation will be confirmed with your quotation.
| Material | Stainless steel |
| Grade | TP321 |
| Manufacturing type | Specify seamless or welded where applicable |
| Dimensions | Provide outside diameter, wall thickness and length |
| Standard & tolerance | Provide the applicable project specification |
| Finish | Specify your required surface finish |
| Quantity & documentation | Specify quantity and any certificate or inspection requirements |
Keep TP321 pipe and tube requirements separate
For a TP321 pipe enquiry under ASTM A312, identify the exact pipe specification and dimensions. If your drawing instead calls for tubing, use the appropriate tube specification rather than transferring the pipe standard automatically. Add fabrication requirements and any service conditions relevant to the project’s material approval.
Comparing supplier quotations
A quotation should distinguish the selected grade, product form and governing standard. These three details should also be consistent on the purchase requirement and requested documentation.
Example enquiry checklist
ASTM A312 TP321 pipe; edition; nominal size and schedule; length; construction; quantity; end condition and documentation.
ASTM A312 TP321 Pipes supplier enquiries in Mumbai, India
Tokk Steel is the stainless steel pipes and tubes division of Shatrunjay Special Alloy in Mumbai, India. Send your astm a312 tp321 pipes specification to our team with the grade, dimensions and quantity required by your project.
For a local enquiry in Mumbai, include your preferred collection or delivery arrangements for review. For a project elsewhere in India, include the destination and required date so availability, logistics and the quotation scope can be confirmed. Your location does not replace the technical specification: attach the drawing or material requirement when one is available.
Request a product quotation ↗Specification details for this product
| Detail | Information to provide |
|---|---|
| Exact grade and governing standard | Specify with the enquiry |
| Pipe or tube dimensional designation | Specify with the enquiry |
| Construction type and documentation | Specify with the enquiry |
Typical application areas
- Project-specific equipment
- Industrial assemblies
- Requirements defined by your design
Final material suitability should be assessed against your project’s operating conditions and applicable standards.
Buying astm a312 tp321 pipes
State TP321 and the governing pipe specification. Include any fabrication, service or inspection requirements from your project.
Define the purchase specification
Match the exact grade on the enquiry, quotation and material documentation. Any proposed substitution should be reviewed against the project requirements.
Grade guidance: Outokumpu stainless steel types. Check the applicable material specification for acceptance criteria.
Questions about ASTM A312 TP321 Pipes
What should I specify for astm a312 tp321 pipes?
State TP321 and the governing pipe specification. Include any fabrication, service or inspection requirements from your project.
Are all listed sizes and grades held in stock?
Availability, dimensions, lead time and documentation are confirmed with your quotation. Send your exact requirement rather than assuming availability from a product category.
Quotation questions
What should I include in my enquiry?
Include grade, dimensions, quantity, required standard, finish and delivery destination. Attach your specification when sending the email draft.
Can you confirm sizes and availability?
Our team will review your dimensions and confirm availability and lead time as part of the quotation.
